RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Husaberg
HUSA.22.1.RACEDB.SAT
Husaberg FE 250 2013>2014
Satinox
Slip-on exhaust including link pipe and removable db killer HUSA.22.1.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Husqvarna
HU.58.1.RACEDB.SAT
Husqvarna FE 450 2015>2016
Satinox
Slip-on exhaust including link pipe and removable db killer HU.58.1.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Husqvarna
HU.58.RACEDB.SAT
Husqvarna FE 250 2014>2016
Satinox
Slip-on exhaust including link pipe and removable db killer HU.58.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Husaberg
HUSA.22.2.RACEDB.SAT
Husaberg FE 350 2013>2014
Satinox
Slip-on exhaust including link pipe and removable db killer HUSA.22.2.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KAWASAKI
K.29.RACEDB.SAT
KAWASAKI KLR650 KLR650 R-C 1988>2025
Satinox
Slip-on exhaust including link pipe and removable db killer K.29.RACEDB.SAT
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
CO.K.161.2.DBHOM.SAT
KAWASAKI Z650RS 2021>2023
Satinox
Full system exhaust, including removable db killer CO.K.161.2.DBHOM.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.8.RACEDB.SAT
KTM 350 XC-F 2011>2015
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.8.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.7.RACEDB.SAT
KTM 350 SXF 2011>2015
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.7.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.9.RACEDB.SAT
KTM 350 XCF-W 2012>2016
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.9.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.11.RACEDB.SAT
KTM 450 EXC 2009>2011
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.11.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.10.RACEDB.SAT
KTM 400 XCW 2012>2016
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.10.RACEDB.SAT
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E5.CO.Y.215.DBHOM.SAT
YAMAHA Mt 125 2020>2020
Satinox
Full system exhaust, including removable db killer E5.CO.Y.215.DBHOM.SAT Note: It is to mount in a high level position
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.225.DBHOM.SAT
YAMAHA FZ-7 MT07 2021>2024
Satinox
Full system exhaust, including removable db killer Y.225.DBHOM.SAT Note: It is mounted in a lateral position
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E5.CO.Y.218.DBHOM.SAT
YAMAHA Mt 125 2021>2025
Satinox
Full system exhaust, including removable db killer E5.CO.Y.218.DBHOM.SAT Note: It is to mount in a high level position
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.18.RACEDB.SAT
KTM 450 XCRW 2008>2008
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.18.RACEDB.SAT
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E5.CO.Y.231.DBHOM.SAT
YAMAHA XSR125 2021>2025
Satinox
Full system exhaust, including removable db killer E5.CO.Y.231.DBHOM.SAT Note: It is to mount in a high level position
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.16.RACEDB.SAT
KTM 450 XCF 2009>2009
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.16.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.17.RACEDB.SAT
KTM 450 XC-F 2013>2015
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.17.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.12.RACEDB.SAT
KTM 450 Excr 2008>2008
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.12.RACEDB.SAT
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.DBHOM.SAT
YAMAHA Tracer 700 2020>2021
Satinox
Full system exhaust, including removable db killer Y.227.DBHOM.SAT Note: It is mounted in a lateral position
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.6.RACEDB.SAT
KTM 250 XCF-W 2009>2015
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.6.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.13.RACEDB.SAT
KTM 450 SMR 2013>2013
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.13.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
ROYAL ENFIELD
ROY.1.RACEDB.SAT
ROYAL ENFIELD Continental GT 535 2014>2016
Satinox
Slip-on exhaust including link pipe and removable db killer ROY.1.RACEDB.SAT
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.2.DBHOM.SAT
YAMAHA Tracer 7 2021>2024
Satinox
Full system exhaust, including removable db killer Y.227.2.DBHOM.SAT Note: It is mounted in a lateral position
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.15.RACEDB.SAT
KTM 450 SXF Factory Edition 2012>2014
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.15.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.14.RACEDB.SAT
KTM 450 SXF 2007>2015
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.14.RACEDB.SAT
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.1.DBHOM.SAT
YAMAHA Tracer 700 GT 2019>2020
Satinox
Full system exhaust, including removable db killer Y.227.1.DBHOM.SAT Note: It is mounted in a lateral position
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.5.RACEDB.SAT
KTM 250 XC-F 2009>2015
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.5.RACEDB.SAT
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.226.DBHOM.SAT
YAMAHA XSR700 2021>2024
Satinox
Full system exhaust, including removable db killer Y.226.DBHOM.SAT Note: It is mounted in a lateral position
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.337.3.DBHOM.SAT
YAMAHA Tracer 7 GT 2020>2024
Satinox
Full system exhaust, including removable db killer Y.337.3.DBHOM.SAT Note: It is mounted in a lateral position
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
YA.DBHOM.11.SAT
YAMAHA T-Max 560 2022>2024
Satinox
Full system exhaust, including removable db killer YA.DBHOM.11.SAT
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
YA.DBHOM.10.SAT
YAMAHA T-Max 560 2020>2021
Satinox
Full system exhaust, including removable db killer YA.DBHOM.10.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Honda
H.83.1.RACEDB.TRI
Honda XR650L 1993>2025
Trioval
Slip-on exhaust including link pipe and removable db killer H.83.1.RACEDB.TRI
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KAWASAKI
K.29.RACEDB.TRI
KAWASAKI KLR650 KLR650 R-C 1988>2025
Trioval
Slip-on exhaust including link pipe and removable db killer K.29.RACEDB.TRI
Kit removes the original catalyst For installation, no structural modifications to the motorcycle are required for use of the product in an approved version. It is recommended to read the instructions in the package or the tutorials visible on www.gpr.it and on youtube. For on-line purchases it is necessary to activate the warranty by sending the special coupon stamped by the installation workshop via email to certificato@gpr.it, for purchases at physical stores the shop stamp is sufficient. The exhaust has a removable db killer (noise restrictor) for racing use, remove the db killer is not ONLY illegal, but the customer assumes the responsibility to use the motorbike as on the circuits only, without bags, without flash light and number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with devolution to GPR factory or nearest official distributor at client expenses. GPR cannot provide a new silencer instead of the one to repair, the client has to accept to remount the original exhaust or wait the standard time for the reparation. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
ROYAL ENFIELD
ROY.12.RACE.DENE
ROYAL ENFIELD Classic 350 2021>2023
Deeptone Nero
Slip-on exhaust including link pipe ROY.12.RACE.DENE Note: Kit removes the original catalyst
Kit removes the original catalyst For installation, no structural modifications to the motorcycle are required for use of the product in an approved version. It is recommended to read the instructions in the package or the tutorials visible on www.gpr.it and on youtube. For on-line purchases it is necessary to activate the warranty by sending the special coupon stamped by the installation workshop via email to certificato@gpr.it, for purchases at physical stores the shop stamp is sufficient. The exhaust has a removable db killer (noise restrictor) for racing use, remove the db killer is not ONLY illegal, but the customer assumes the responsibility to use the motorbike as on the circuits only, without bags, without flash light and number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with devolution to GPR factory or nearest official distributor at client expenses. GPR cannot provide a new silencer instead of the one to repair, the client has to accept to remount the original exhaust or wait the standard time for the reparation. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
ROYAL ENFIELD
ROY.10.RACE.DENE
ROYAL ENFIELD Meteor 350 2021>2023
Deeptone Nero
Slip-on exhaust including link pipe ROY.10.RACE.DENE Note: Kit removes the original catalyst
Kit removes the original catalystTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Cf Moto
CF.6.RACEDB.FUNE
Cf Moto 400 NK 2021>2023
Furore Nero
Slip-on exhaust, including link pipe and removable db killer CF.6.RACEDB.FUNE Note: Kit removes the original catalyst
Kit removes the original catalystTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Cf Moto
CF.4.RACEDB.FUNE
Cf Moto 650 Mt 2021>2024
Furore Nero
Slip-on exhaust, including link pipe and removable db killer CF.4.RACEDB.FUNE Note: Kit removes the original catalyst
Kit removes the original catalystTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Cf Moto
CF.2.RACEDB.FUNE
Cf Moto 650 Nk 2021>2024
Furore Nero
Slip-on exhaust, including link pipe and removable db killer CF.2.RACEDB.FUNE Note: Kit removes the original catalyst
Kit removes the original catalystTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Cf Moto
CF.4.1.RACEDB.FUNE
Cf Moto 700 Mt 2023>2024
Furore Nero
Slip-on exhaust, including link pipe and removable db killer CF.4.1.RACEDB.FUNE Note: Kit removes the original catalyst
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KT.99.RACE.DE
KTM 250 Adventure Sw 2020>2024
Deeptone Inox
Slip-on exhaust including removable db killer and link pipe KT.99.RACE.DE
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KT.99.RACE.M3.INOX
KTM 250 Adventure Sw 2020>2024
M3 Inox
Slip-on exhaust including removable db killer and link pipe KT.99.RACE.M3.INOX
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KT.99.RACE.FUNE
KTM 250 Adventure Sw 2020>2024
Furore Nero
Slip-on exhaust including removable db killer and link pipe KT.99.RACE.FUNE
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KT.99.1.RACE.DE
KTM 390 Adventure Sw 2020>2020
Deeptone Inox
Slip-on exhaust including removable db killer and link pipe KT.99.1.RACE.DE
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KT.99.1.RACE.M3.INOX
KTM 390 Adventure Sw 2020>2020
M3 Inox
Slip-on exhaust including removable db killer and link pipe KT.99.1.RACE.M3.INOX
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KT.99.2.RACE.DE
KTM 390 Adventure Sw 2021>2024
Deeptone Inox
Slip-on exhaust including removable db killer and link pipe KT.99.2.RACE.DE
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KT.99.2.RACE.FUNE
KTM 390 Adventure Sw 2021>2024
Furore Nero
Slip-on exhaust including removable db killer and link pipe KT.99.2.RACE.FUNE
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KT.99.2.RACE.M3.INOX
KTM 390 Adventure Sw 2021>2024
M3 Inox
Slip-on exhaust including removable db killer and link pipe KT.99.2.RACE.M3.INOX
We inform you that we use first- and third-party cookies in order to improve the performance of the page and for analytical and advertising purposes. If you want more information or would like to manage them, please go to the Cookie settings.
Manage preferences
MandatoryAnalytics and advertising
Técnicas: son aquellas necesarias para la navegación y el buen funcionamiento de nuestro website. Permiten, por ejemplo, controlar el tráfico y la comunicación de datos, acceder a partes de acceso restringido, realizar el proceso de compra de un pedido, utilizar elementos de seguridad, almacenar contenidos para poder difundir vídeos o compartir contenidos a través de redes sociales.
De personalización: son aquellas que permiten al Usuario acceder al servicio con unas características predefinidas en función de una serie de criterios, como por ejemplo el idioma, el tipo de navegador a través del cual se accede al servicio, la configuración regional desde donde se accede al servicio, etc.
Finalidad
Proveedor
Nombre
Gestión
Función
Vigencia
Técnicas
Cookie Propia
validacions_cookies
Propia
Gestión de la aceptación de las cookies.
1 año.
Personalización
Cookie Propia
(Aleatorio)
Propia
Gestión de la sesión del visitante..
Al finalizar la sesión en el navegador.
De análisis: son aquellas que, tratadas por nosotros o por terceros, nos permiten cuantificar el número de usuarios y así realizar la medición y análisis estadístico de la utilización que hacen los usuarios del servicio ofertado. Para ello se analiza su navegación en nuestra página web con el fin de mejorar la oferta de productos o servicios que le ofrecemos.
