Mount in low positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
CO.Y.218.RACEDB.M3.INOX
YAMAHA FZ-09 2017>2020
M3 Inox
Full system exhaust, including removable db killer CO.Y.218.RACEDB.M3.INOX Note: Mount in low position
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KAWASAKI
E4.K.174.FXSC
KAWASAKI Ninja 400 2018>2022
Furore-X Inox
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E4.K.174.FXSC
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KAWASAKI
E4.K.173.FXSC
KAWASAKI Z400 2018>2022
Furore-X Inox
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E4.K.173.FXSC
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the fitting (link pipe) and its specific catalyst with the appropriate brackets and accessories. This allows for installation without any structural modifications.
KAWASAKI
K.148.CAT.FXSC
KAWASAKI ZX-14R 2012>2016
Furore-X Inox
Dual slip-on exhausts including removable db killers, link pipes and catalysts, EPA-compliant K.148.CAT.FXSC
2 in 1, left hand sideTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. The kit includes specific half-manifold in which the catalyst is mounted. The installation does not require cutting or making changes. Rather, the GPR half-manifold mounts on the first original point where the original hose clamps are.
Moto Guzzi
GU.19.FXSC
Moto Guzzi V 11 Sport-Le Mans-Cafè-Naked 1999>2005
Furore-X Inox
Mid-Full system exhaust including removeble db killer and catalyst, EPA-compliant GU.19.FXSC Note: 2 in 1, left hand side
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Suzuki
S.200.DBHOM.FXSC
Suzuki Gsx-8R 2022>2024
Furore-X Inox
Full system exhaust, including removable db killer S.200.DBHOM.FXSC
Not homologatedTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
Suzuki
S.200.RACEDB.FXSC
Suzuki Gsx-8R 2022>2024
Furore-X Inox
Full system exhaust, including removable db killer S.200.RACEDB.FXSC Note: Not homologated
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Suzuki
S.199.DBHOM.FXSC
Suzuki Gsx-8S 2022>2024
Furore-X Inox
Full system exhaust, including removable db killer S.199.DBHOM.FXSC
Racing System with DB Killer, Not HomologatedTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
Suzuki
S.199.RACEDB.FXSC
Suzuki Gsx-8S 2022>2024
Furore-X Inox
Full system exhaust, including removable db killer S.199.RACEDB.FXSC Note: Racing System with DB Killer, Not Homologated
It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
Y.225.RACEDB.FXSC
YAMAHA FZ-7 MT07 2021>2024
Furore-X Inox
Full system exhaust, including removable db killer Y.225.RACEDB.FXSC Note: It is mounted in a lateral position
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.226.DBHOM.FXSC
YAMAHA XSR700 2021>2024
Furore-X Inox
Full system exhaust, including removable db killer Y.226.DBHOM.FXSC Note: It is mounted in a lateral position
No, but this limit is required only for local citizens and not for tourists.The package includes a manifold stainless steel made, flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes. Remapping the control unit may be necessary after the installation.2026 News! Furore-X series, silencer 304 stainless steel made, features an oval-shaped body (diameter 90mm x 130mm) in 0.8mm thick stainless steel and a perforated 0.8mm stainless steel barrel. The tapered end caps are made of satin-finish 304 stainless steel, and are equipped with a dB-killer and a specific mounting bracket. It guarantees significant weight savings compared to the original muffler, superior performance, a modern and elegant design, and a deep yet unobtrusive sound that complies with legal limits. Furore-X was developed thanks to investments in the Moto2 and Moto3 world championships and is one of GPR's new 2026 products, Made in Italy!
YAMAHA
CO.Y.187.FXSC
YAMAHA FJ-09 Tracer 2015>2016
Furore-X Inox
Brushed Stainless steel CO.Y.187.FXSC Note: No, but this limit is required only for local citizens and not for tourists.
No, but this limit is required only for local citizens and not for tourists.GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.2026 News! Furore-X series, silencer 304 stainless steel made, features an oval-shaped body (diameter 90mm x 130mm) in 0.8mm thick stainless steel and a perforated 0.8mm stainless steel barrel. The tapered end caps are made of satin-finish 304 stainless steel, and are equipped with a dB-killer and a specific mounting bracket. It guarantees significant weight savings compared to the original muffler, superior performance, a modern and elegant design, and a deep yet unobtrusive sound that complies with legal limits. Furore-X was developed thanks to investments in the Moto2 and Moto3 world championships and is one of GPR's new 2026 products, Made in Italy!
YAMAHA
CO.Y.187.CAT.FXSC
YAMAHA FJ-09 Tracer 2015>2016
Furore-X Inox
Brushed Stainless steel CO.Y.187.CAT.FXSC Note: No, but this limit is required only for local citizens and not for tourists.
No, but this limit is required only for local citizens and not for tourists.GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.2026 News! Furore-X series, silencer 304 stainless steel made, features an oval-shaped body (diameter 90mm x 130mm) in 0.8mm thick stainless steel and a perforated 0.8mm stainless steel barrel. The tapered end caps are made of satin-finish 304 stainless steel, and are equipped with a dB-killer and a specific mounting bracket. It guarantees significant weight savings compared to the original muffler, superior performance, a modern and elegant design, and a deep yet unobtrusive sound that complies with legal limits. Furore-X was developed thanks to investments in the Moto2 and Moto3 world championships and is one of GPR's new 2026 products, Made in Italy!
YAMAHA
CO.Y.187.RACEDB.FXSC
YAMAHA FJ-09 Tracer 2015>2020
Furore-X Inox
Brushed Stainless steel CO.Y.187.RACEDB.FXSC Note: No, but this limit is required only for local citizens and not for tourists.
No, but this limit is required only for local citizens and not for tourists.GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.2026 News! Furore-X series, silencer 304 stainless steel made, features an oval-shaped body (diameter 90mm x 130mm) in 0.8mm thick stainless steel and a perforated 0.8mm stainless steel barrel. The tapered end caps are made of satin-finish 304 stainless steel, and are equipped with a dB-killer and a specific mounting bracket. It guarantees significant weight savings compared to the original muffler, superior performance, a modern and elegant design, and a deep yet unobtrusive sound that complies with legal limits. Furore-X was developed thanks to investments in the Moto2 and Moto3 world championships and is one of GPR's new 2026 products, Made in Italy!
YAMAHA
E4.CO.Y.201.CAT.FXSC
YAMAHA FJ-09 Tracer 2017>2020
Furore-X Inox
Brushed Stainless steel E4.CO.Y.201.CAT.FXSC Note: No, but this limit is required only for local citizens and not for tourists.
No, but this limit is required only for local citizens and not for tourists.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.2026 News! Furore-X series, silencer 304 stainless steel made, features an oval-shaped body (diameter 90mm x 130mm) in 0.8mm thick stainless steel and a perforated 0.8mm stainless steel barrel. The tapered end caps are made of satin-finish 304 stainless steel, and are equipped with a dB-killer and a specific mounting bracket. It guarantees significant weight savings compared to the original muffler, superior performance, a modern and elegant design, and a deep yet unobtrusive sound that complies with legal limits. Furore-X was developed thanks to investments in the Moto2 and Moto3 world championships and is one of GPR's new 2026 products, Made in Italy!
YAMAHA
E4.CO.Y.201.DBHOM.FXSC
YAMAHA FJ-09 Tracer 2017>2020
Furore-X Inox
Brushed Stainless steel E4.CO.Y.201.DBHOM.FXSC Note: No, but this limit is required only for local citizens and not for tourists.
No, but this limit is required only for local citizens and not for tourists.GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.2026 News! Furore-X series, silencer 304 stainless steel made, features an oval-shaped body (diameter 90mm x 130mm) in 0.8mm thick stainless steel and a perforated 0.8mm stainless steel barrel. The tapered end caps are made of satin-finish 304 stainless steel, and are equipped with a dB-killer and a specific mounting bracket. It guarantees significant weight savings compared to the original muffler, superior performance, a modern and elegant design, and a deep yet unobtrusive sound that complies with legal limits. Furore-X was developed thanks to investments in the Moto2 and Moto3 world championships and is one of GPR's new 2026 products, Made in Italy!
YAMAHA
E4.CO.Y.201.2.CAT.FXSC
YAMAHA Tracer 900 GT 2018>2020
Furore-X Inox
Brushed Stainless steel E4.CO.Y.201.2.CAT.FXSC Note: No, but this limit is required only for local citizens and not for tourists.
No, but this limit is required only for local citizens and not for tourists.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.2026 News! Furore-X series, silencer 304 stainless steel made, features an oval-shaped body (diameter 90mm x 130mm) in 0.8mm thick stainless steel and a perforated 0.8mm stainless steel barrel. The tapered end caps are made of satin-finish 304 stainless steel, and are equipped with a dB-killer and a specific mounting bracket. It guarantees significant weight savings compared to the original muffler, superior performance, a modern and elegant design, and a deep yet unobtrusive sound that complies with legal limits. Furore-X was developed thanks to investments in the Moto2 and Moto3 world championships and is one of GPR's new 2026 products, Made in Italy!
YAMAHA
E4.CO.Y.201.2.DBHOM.FXSC
YAMAHA Tracer 900 GT 2018>2020
Furore-X Inox
Brushed Stainless steel E4.CO.Y.201.2.DBHOM.FXSC Note: No, but this limit is required only for local citizens and not for tourists.
GPR TECH TOP CASE ALPI-TECH, capacity 35 Liters, 5052 aluminum made,with reinforced corners, Silver color with specific plate an hardware included to can mount the product on original rear rack without any modification. This Top Case allow to place an Enduro helmet. The GPR TECH top case includes a washable and removable lining for helmet protection. The backrest protection can be purchased separately
Voge
V.5.BA.35.ALP.A
Voge DS 800 Rally 2025>2026
Capacity 35 LT.
Top case in aluminum, silver color with specific plate included V.5.BA.35.ALP.A
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
Suzuki
E5.S.200.CAT.FXSC
Suzuki Gsx-8R 2022>2024
Furore-X Inox
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.S.200.CAT.FXSC
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
Suzuki
E5.S.199.CAT.FXSC
Suzuki Gsx-8S 2022>2024
Furore-X Inox
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.S.199.CAT.FXSC
The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust may has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
Aprilia
A.81.RACEDB.M3.BT
Aprilia TUONO 660 2021>2024
M3 Black Titanium
Full system exhaust, including removable db killer A.81.RACEDB.M3.BT Note: The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.
Mount in low positionThe GPR approved silencer kit plus under-engine muffler can be installed with the supplied GPR manifold having a non-approved catalyst but compliant with the revision levels, or it can be installed by cutting the original manifold to preserve the original catalyst, this modification must be performed by a specialized workshop, the GPR manifold is anyway included in the cost and packing For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.180.CAT.GPRBLTIT
YAMAHA FJ-09 Tracer 2015>2016
GP-Revo Black Titanium
Full system including silencer approved for noise,db killer and catalyst, EPA-compliant compliant for inspection CO.Y.180.CAT.GPRBLTIT Note: Mount in low position
Mount in low positionThe GPR approved silencer kit plus under-engine muffler can be installed with the supplied GPR manifold having a non-approved catalyst but compliant with the revision levels, or it can be installed by cutting the original manifold to preserve the original catalyst, this modification must be performed by a specialized workshop, the GPR manifold is anyway included in the cost and packing For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.180.CAT.GPRTIT
YAMAHA FJ-09 Tracer 2015>2016
GP-Revo Titanium
Full system including silencer approved for noise,db killer and catalyst, EPA-compliant compliant for inspection CO.Y.180.CAT.GPRTIT Note: Mount in low position
Mount in low positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
CO.Y.180.CAT.M3.INOX
YAMAHA FJ-09 Tracer 2015>2016
M3 Inox
Full system exhaust including removable db killer and catalyst, EPA-compliant CO.Y.180.CAT.M3.INOX Note: Mount in low position
Mount in low positionRACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.179.RACEDB.GPRBLTIT
YAMAHA FJ-09 Tracer 2015>2016
GP-Revo Black Titanium
Full system exhaust, including removable db killer CO.Y.179.RACEDB.GPRBLTIT Note: Mount in low position
Mount in low positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.179.RACEDB.GPRTIT
YAMAHA FJ-09 Tracer 2015>2016
GP-Revo Titanium
Full system exhaust, including removable db killer CO.Y.179.RACEDB.GPRTIT Note: Mount in low position
Mount in low positionThe GPR approved silencer kit plus under-engine muffler can be installed with the supplied GPR manifold having a non-approved catalyst but compliant with the revision levels, or it can be installed by cutting the original manifold to preserve the original catalyst, this modification must be performed by a specialized workshop, the GPR manifold is anyway included in the cost and packing For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.202.CAT.GPRBLTIT
YAMAHA FJ-09 Tracer 2017>2020
GP-Revo Black Titanium
Full system including silencer approved for noise,db killer and catalyst, EPA-compliant compliant for inspection CO.Y.202.CAT.GPRBLTIT Note: Mount in low position
Mount in low positionThe GPR approved silencer kit plus under-engine muffler can be installed with the supplied GPR manifold having a non-approved catalyst but compliant with the revision levels, or it can be installed by cutting the original manifold to preserve the original catalyst, this modification must be performed by a specialized workshop, the GPR manifold is anyway included in the cost and packing For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.202.CAT.GPRTIT
YAMAHA FJ-09 Tracer 2017>2020
GP-Revo Titanium
Full system including silencer approved for noise,db killer and catalyst, EPA-compliant compliant for inspection CO.Y.202.CAT.GPRTIT Note: Mount in low position
Mount in low positionRACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.202.RACEDB.GPRBLTIT
YAMAHA FJ-09 Tracer 2017>2020
GP-Revo Black Titanium
Full system exhaust, including removable db killer CO.Y.202.RACEDB.GPRBLTIT Note: Mount in low position
Mount in low positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.202.RACEDB.GPRTIT
YAMAHA FJ-09 Tracer 2017>2020
GP-Revo Titanium
Full system exhaust, including removable db killer CO.Y.202.RACEDB.GPRTIT Note: Mount in low position
Mount in low positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
CO.Y.202.RACEDB.M3.INOX
YAMAHA FJ-09 Tracer 2017>2020
M3 Inox
Full system exhaust, including removable db killer CO.Y.202.RACEDB.M3.INOX Note: Mount in low position
Mount in low positionThe GPR approved silencer kit plus under-engine muffler can be installed with the supplied GPR manifold having a non-approved catalyst but compliant with the revision levels, or it can be installed by cutting the original manifold to preserve the original catalyst, this modification must be performed by a specialized workshop, the GPR manifold is anyway included in the cost and packing For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
E4.CO.Y.195.CAT.GPRBLTIT
YAMAHA FJ-09 Tracer GT 2018>2020
GP-Revo Black Titanium
Full system including silencer approved for noise,db killer and catalyst, EPA-compliant compliant for inspection E4.CO.Y.195.CAT.GPRBLTIT Note: Mount in low position
Mount in low positionThe GPR approved silencer kit plus under-engine muffler can be installed with the supplied GPR manifold having a non-approved catalyst but compliant with the revision levels, or it can be installed by cutting the original manifold to preserve the original catalyst, this modification must be performed by a specialized workshop, the GPR manifold is anyway included in the cost and packing For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
E4.CO.Y.195.CAT.GPRTIT
YAMAHA FJ-09 Tracer GT 2018>2020
GP-Revo Titanium
Full system including silencer approved for noise,db killer and catalyst, EPA-compliant compliant for inspection E4.CO.Y.195.CAT.GPRTIT Note: Mount in low position
Mount in low positionRACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.195.RACEDB.GPRBLTIT
YAMAHA FJ-09 Tracer GT 2018>2020
GP-Revo Black Titanium
Full system exhaust, including removable db killer CO.Y.195.RACEDB.GPRBLTIT Note: Mount in low position
Mount in low positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.195.RACEDB.GPRTIT
YAMAHA FJ-09 Tracer GT 2018>2020
GP-Revo Titanium
Full system exhaust, including removable db killer CO.Y.195.RACEDB.GPRTIT Note: Mount in low position
Mount in low positionThe GPR approved silencer kit plus under-engine muffler can be installed with the supplied GPR manifold having a non-approved catalyst but compliant with the revision levels, or it can be installed by cutting the original manifold to preserve the original catalyst, this modification must be performed by a specialized workshop, the GPR manifold is anyway included in the cost and packing For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.186.CAT.GPRBLTIT
YAMAHA XSR900 2016>2020
GP-Revo Black Titanium
Full system including silencer approved for noise,db killer and catalyst, EPA-compliant compliant for inspection CO.Y.186.CAT.GPRBLTIT Note: Mount in low position
Mount in low positionThe GPR approved silencer kit plus under-engine muffler can be installed with the supplied GPR manifold having a non-approved catalyst but compliant with the revision levels, or it can be installed by cutting the original manifold to preserve the original catalyst, this modification must be performed by a specialized workshop, the GPR manifold is anyway included in the cost and packing For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.186.CAT.GPRTIT
YAMAHA XSR900 2016>2020
GP-Revo Titanium
Full system including silencer approved for noise,db killer and catalyst, EPA-compliant compliant for inspection CO.Y.186.CAT.GPRTIT Note: Mount in low position
Mount in low positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
CO.Y.186.M3.INOX
YAMAHA XSR900 2016>2020
M3 Inox
Full system exhaust including removable db killer and catalyst, EPA-compliant CO.Y.186.M3.INOX Note: Mount in low position
Underengine Exhaust PositionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
CO.Y.186.RACEDB.DE
YAMAHA XSR900 2016>2020
Deeptone Inox
Full system exhaust, including removable db killer CO.Y.186.RACEDB.DE Note: Underengine Exhaust Position
Mount in low positionRACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.186.RACEDB.GPRBLTIT
YAMAHA XSR900 2016>2020
GP-Revo Black Titanium
Full system exhaust, including removable db killer CO.Y.186.RACEDB.GPRBLTIT Note: Mount in low position
Mount in low positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
CO.Y.186.RACEDB.GPRTIT
YAMAHA XSR900 2016>2020
GP-Revo Titanium
Full system exhaust, including removable db killer CO.Y.186.RACEDB.GPRTIT Note: Mount in low position
We inform you that we use first- and third-party cookies in order to improve the performance of the page and for analytical and advertising purposes. If you want more information or would like to manage them, please go to the Cookie settings.
Manage preferences
MandatoryAnalytics and advertising
Técnicas: son aquellas necesarias para la navegación y el buen funcionamiento de nuestro website. Permiten, por ejemplo, controlar el tráfico y la comunicación de datos, acceder a partes de acceso restringido, realizar el proceso de compra de un pedido, utilizar elementos de seguridad, almacenar contenidos para poder difundir vídeos o compartir contenidos a través de redes sociales.
De personalización: son aquellas que permiten al Usuario acceder al servicio con unas características predefinidas en función de una serie de criterios, como por ejemplo el idioma, el tipo de navegador a través del cual se accede al servicio, la configuración regional desde donde se accede al servicio, etc.
Finalidad
Proveedor
Nombre
Gestión
Función
Vigencia
Técnicas
Cookie Propia
validacions_cookies
Propia
Gestión de la aceptación de las cookies.
1 año.
Personalización
Cookie Propia
(Aleatorio)
Propia
Gestión de la sesión del visitante..
Al finalizar la sesión en el navegador.
De análisis: son aquellas que, tratadas por nosotros o por terceros, nos permiten cuantificar el número de usuarios y así realizar la medición y análisis estadístico de la utilización que hacen los usuarios del servicio ofertado. Para ello se analiza su navegación en nuestra página web con el fin de mejorar la oferta de productos o servicios que le ofrecemos.
