ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
DUCATI
E4.D.134.DBHOM.PCEV
DUCATI Monster 797 2017>2021
Powercone Evo
Slip-on exhaust including link pipe and removable db killer E4.D.134.DBHOM.PCEV
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
DUCATI
D.114.PCEV
DUCATI Monster 821 2015>2016
Powercone Evo
Slip-on exhaust including removable db killer and link pipe, not EPA-compliant D.114.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
DUCATI
E4.D.133.DBHOM.PCEV
DUCATI Monster 821 2017>2021
Powercone Evo
Slip-on exhaust including link pipe and removable db killer E4.D.133.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
DUCATI
E4.D.128.DBHOM.PCEV
DUCATI Monster 1200 1200S 1200R 2017>2021
Powercone Evo
Slip-on exhaust including link pipe and removable db killer E4.D.128.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E5.CO.H.260.2.DBHOM.PCEV
Honda CB650F 2019>2022
Powercone Evo
Full system exhaust, including removable db killer E5.CO.H.260.2.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E4.CO.H.260.1.DBHOM.PCEV
Honda CB650R 2019>2020
Powercone Evo
Full system exhaust, including removable db killer E4.CO.H.260.1.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E4.CO.H.249.1.DBHOM.PCEV
Honda CBR650F 2017>2018
Powercone Evo
Full system exhaust, including removable db killer E4.CO.H.249.1.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E5.CO.H.260.1.DBHOM.PCEV
Honda CB650R 2021>2023
Powercone Evo
Full system exhaust, including removable db killer E5.CO.H.260.1.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E4.CO.H.261.1.DBHOM.PCEV
Honda CBR650R 2019>2020
Powercone Evo
Full system exhaust, including removable db killer E4.CO.H.261.1.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E5.CO.H.261.1.DBHOM.PCEV
Honda CBR650R 2021>2023
Powercone Evo
Full system exhaust, including removable db killer E5.CO.H.261.1.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E4.CO.H.249.DBHOM.PCEV
Honda CB650F 2017>2018
Powercone Evo
Full system exhaust, including removable db killer E4.CO.H.249.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E5.CO.K.161.1.DBHOM.PCEV
KAWASAKI Ninja 650 2021>2022
Powercone Evo
Full system exhaust, including removable db killer E5.CO.K.161.1.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E4.CO.K.161.DBHOM.PCEV
KAWASAKI Ninja 650 2017>2020
Powercone Evo
Full system exhaust, including removable db killer E4.CO.K.161.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E5.CO.K.161.2.DBHOM.PCEV
KAWASAKI Ninja 650 EX650M 2023>2024
Powercone Evo
Full system exhaust, including removable db killer E5.CO.K.161.2.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E5.CO.K.172.3.DBHOM.PCEV
KAWASAKI Vulcan 650 2021>2023
Powercone Evo
Full system exhaust, including removable db killer E5.CO.K.172.3.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E5.CO.K.160.1.DBHOM.PCEV
KAWASAKI Z-650 2021>2022
Powercone Evo
Full system exhaust, including removable db killer E5.CO.K.160.1.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E5.CO.K.187.DBHOM.PCEV
KAWASAKI Z 650 650 EX650M 2023>2024
Powercone Evo
Full system exhaust, including removable db killer E5.CO.K.187.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E5.CO.K.172.1.DBHOM.PCEV
KAWASAKI Vulcan 650 2014>2016
Powercone Evo
Full system exhaust, including removable db killer E5.CO.K.172.1.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
CO.K.161.2.DBHOM.PCEV
KAWASAKI Z650RS 2021>2023
Powercone Evo
Full system exhaust, including removable db killer CO.K.161.2.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E4.CO.K.160.DBHOM.PCEV
KAWASAKI Z-650 2017>2020
Powercone Evo
Full system exhaust, including removable db killer E4.CO.K.160.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E5.CO.K.172.2.DBHOM.PCEV
KAWASAKI Vulcan 650 2017>2020
Powercone Evo
Full system exhaust, including removable db killer E5.CO.K.172.2.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Mv Agusta
E4.MV.6.DBHOM.PCEV
Mv Agusta Brutale 800 2017>2020
Powercone Evo
Slip-on exhaust including link pipe and removable db killer E4.MV.6.DBHOM.PCEV
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Mv Agusta
E4.MV.15.DBHOM.PCEV
Mv Agusta Brutale 800 Dragster 2017>2020
Powercone Evo
Slip-on exhaust including link pipe and removable db killer E4.MV.15.DBHOM.PCEV
Fits without the original gasket ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
ROYAL ENFIELD
ROY.4.PCEV
ROYAL ENFIELD Himalayan 410 Diam.36mm 2017>2020
Powercone Evo
Slip-on exhaust including link pipe and removable db killer ROY.4.PCEV Note: Fits without the original gasket
Fits with the original gasket ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
ROYAL ENFIELD
ROY.5.PCEV
ROYAL ENFIELD Himalayan 410 DIAM 42.5 2017>2020
Powercone Evo
Slip-on exhaust including link pipe and removable db killer ROY.5.PCEV Note: Fits with the original gasket
Fits with the original gasket ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
ROYAL ENFIELD
ROY.9.PCEV
ROYAL ENFIELD Himalayan 410 2021>2024
Powercone Evo
Slip-on exhaust including link pipe and removable db killer ROY.9.PCEV Note: Fits with the original gasket
Fits with the original gasket ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
ROYAL ENFIELD
ROY.10.PCEV
ROYAL ENFIELD Scram 411 2022>2024
Powercone Evo
Slip-on exhaust including link pipe and removable db killer ROY.10.PCEV Note: Fits with the original gasket
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
BMW
E4.BM.DBHOM.106.SAT
BMW G310GS 2017>2021
Satinox
Full system exhaust, including removable db killer E4.BM.DBHOM.106.SAT
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
BMW
E5.BM.DBHOM.93.SAT
BMW G310R 2022>2024
Satinox
Full system exhaust, including removable db killer E5.BM.DBHOM.93.SAT
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
BMW
E4.BM.DBHOM.93.SAT
BMW G310R 2017>2021
Satinox
Full system exhaust, including removable db killer E4.BM.DBHOM.93.SAT
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
BMW
E5.BM.DBHOM.106.SAT
BMW G310GS 2022>2024
Satinox
Full system exhaust, including removable db killer E5.BM.DBHOM.106.SAT
Kit removes the original catalystATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific half-manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Cf Moto
CF.9.DBHOM.SAT
Cf Moto 650 Gt 2022>2024
Satinox
Slip-on exhaust including link pipe and removable db killer CF.9.DBHOM.SAT Note: Kit removes the original catalyst
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
DUCATI
D.118.HOM.SAT
DUCATI Scrambler 803 2015>2016
Satinox
Slip-on exhaust including removable db killer and link pipe, not EPA-compliant D.118.HOM.SAT
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
H.269.DBHOM.SAT
Honda Crf 300L / Rally 2021>2024
Satinox
Slip-on exhaust including link pipe and removable db killer H.269.DBHOM.SAT
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
CO.K.161.2.DBHOM.SAT
KAWASAKI Z650RS 2021>2023
Satinox
Full system exhaust, including removable db killer CO.K.161.2.DBHOM.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.9.RACEDB.SAT
KTM 350 XCF-W 2012>2016
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.9.RACEDB.SAT
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KTM
KTM.22.10.RACEDB.SAT
KTM 400 XCW 2012>2016
Satinox
Slip-on exhaust including link pipe and removable db killer KTM.22.10.RACEDB.SAT
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E5.CO.Y.215.DBHOM.SAT
YAMAHA Mt 125 2020>2020
Satinox
Full system exhaust, including removable db killer E5.CO.Y.215.DBHOM.SAT Note: It is to mount in a high level position
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.225.DBHOM.SAT
YAMAHA FZ-7 MT07 2021>2024
Satinox
Full system exhaust, including removable db killer Y.225.DBHOM.SAT Note: It is mounted in a lateral position
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E5.CO.Y.218.DBHOM.SAT
YAMAHA Mt 125 2021>2025
Satinox
Full system exhaust, including removable db killer E5.CO.Y.218.DBHOM.SAT Note: It is to mount in a high level position
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E5.CO.Y.231.DBHOM.SAT
YAMAHA XSR125 2021>2025
Satinox
Full system exhaust, including removable db killer E5.CO.Y.231.DBHOM.SAT Note: It is to mount in a high level position
2 IN 1 ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific half-manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Moto Morini
MO.7.DBHOM.SAT
Moto Morini Seiemmezzo Str 2022>2024
Satinox
Slip-on exhaust including link pipe and removable db killer MO.7.DBHOM.SAT Note: 2 IN 1
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.DBHOM.SAT
YAMAHA Tracer 700 2020>2021
Satinox
Full system exhaust, including removable db killer Y.227.DBHOM.SAT Note: It is mounted in a lateral position
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
ROYAL ENFIELD
ROY.1.RACEDB.SAT
ROYAL ENFIELD Continental GT 535 2014>2016
Satinox
Slip-on exhaust including link pipe and removable db killer ROY.1.RACEDB.SAT
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.2.DBHOM.SAT
YAMAHA Tracer 7 2021>2024
Satinox
Full system exhaust, including removable db killer Y.227.2.DBHOM.SAT Note: It is mounted in a lateral position
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
ROYAL ENFIELD
ROY.8.SAT
ROYAL ENFIELD Classic / Bullet Efi 500 2017>2020
Satinox
Slip-on exhaust including link pipe and removable db killer ROY.8.SAT
2 IN 1 ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific half-manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Moto Morini
MO.7.1.DBHOM.SAT
Moto Morini Seiemmezzo Scr 2022>2024
Satinox
Slip-on exhaust including link pipe and removable db killer MO.7.1.DBHOM.SAT Note: 2 IN 1
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.1.DBHOM.SAT
YAMAHA Tracer 700 GT 2019>2020
Satinox
Full system exhaust, including removable db killer Y.227.1.DBHOM.SAT Note: It is mounted in a lateral position
We inform you that we use first- and third-party cookies in order to improve the performance of the page and for analytical and advertising purposes. If you want more information or would like to manage them, please go to the Cookie settings.
Manage preferences
MandatoryAnalytics and advertising
Técnicas: son aquellas necesarias para la navegación y el buen funcionamiento de nuestro website. Permiten, por ejemplo, controlar el tráfico y la comunicación de datos, acceder a partes de acceso restringido, realizar el proceso de compra de un pedido, utilizar elementos de seguridad, almacenar contenidos para poder difundir vídeos o compartir contenidos a través de redes sociales.
De personalización: son aquellas que permiten al Usuario acceder al servicio con unas características predefinidas en función de una serie de criterios, como por ejemplo el idioma, el tipo de navegador a través del cual se accede al servicio, la configuración regional desde donde se accede al servicio, etc.
Finalidad
Proveedor
Nombre
Gestión
Función
Vigencia
Técnicas
Cookie Propia
validacions_cookies
Propia
Gestión de la aceptación de las cookies.
1 año.
Personalización
Cookie Propia
(Aleatorio)
Propia
Gestión de la sesión del visitante..
Al finalizar la sesión en el navegador.
De análisis: son aquellas que, tratadas por nosotros o por terceros, nos permiten cuantificar el número de usuarios y así realizar la medición y análisis estadístico de la utilización que hacen los usuarios del servicio ofertado. Para ello se analiza su navegación en nuestra página web con el fin de mejorar la oferta de productos o servicios que le ofrecemos.
